visits

YC-A2 2-cavity pet blow molding machine for mineral bottles


Latest Update: 2019-8-31 8:58:53
Machine Color:

A. Settings:

a.PLC ------------SIEMENS(GERMANY)

b.Valve for action------------SMC(KOREA)

c.Valve for blowing-----------FESTO(GERMANY)

d.Cylinder(stretch and clamping)-------------FESTO(GERMANY)

e.Controller of preform transfer---------------Servo motor National(JAPAN)

f.Other electric parts are all world-famous brands

B. Machine Features:

B.1. High Speed: 2000BPH(2-cavity), 4000BPH(4-cavity), 6000BPH(6-cavity),  8000BPH(8-cavity); 

B.2. High Stability: Stable performance with advanced PLC;

B.3. High Efficiency: Under the environment of sharp  penetrability and swift distribution, the preform  will be rotated by itself ;
B.4. High-level Automation: Preforms will be carried automatically by automatic  conveyor;
B.5.High Adjustability: When preheat various preforms, just need to  adjust the light tube and the length of the reflecting board on preheating area.
B.6. High Security: The automatic-locking apparatus in  each mechanical action, which will make all the procedures turn into a state of  safety;
B.7. High Innovation:
1),Cooperation with different atmospheric pressure for blowing  and mechanical action by dividing the blowing and action into three parts in  the air pressure diagram of the machine;
2),Unique design of the position of valve to make the air  pressure diagram of the machine would be easier to understand;
3),Strong clamping force with high pressure and double crank links to lock the  mold tightly;
4),Ideal effect of the chilling with the chilling system;
B.8.High environmental protection: No contamination and low noise with  the air cylinder to drive the action instead of the oil pump;
B.9. High convenience:
1),Two ways of operating: automatic and manual;
2),Low cost (lower consumption of electricity,air and water), high   efficiency, easy operation, easy maintenance, etc, with automatic technological  process;
3), Easy installation and starting;
B.10.High Quantity: Low rejection rate: less than 0.2 percent.      

TYPEITEMUNITYC-A2
CONTAINERTheoretical outputPcs/Hr2000
Max.container volumeL2L
Max.neck diameterMM38
Max.container diameterMM105
Max.container heightMM350
Number of cavityCavity2
ELECTRICAL SYSTEM

Actual power consumption

KW15
Heating powerKW30
Actual total powerKW33
AIR SYSTEMOperataiting low pressureMpa0.7
Low pressure consumptionM3/min0.6-0.8
Blowing pressureMpa3.5
High pressure consumption

M3/min

2-3
CHILLER WHATEROperating pressureMpa0.3-0.5
MACHINEMachine dimensionM2.4x1.5x1.9
Machine weightKg2200

Reviews